Using an Electronic Can Opener
1. Lift the cutter head up. Place the can against the back top part of it. Position the lip of the can between the wheel and the cutting apparatus
2. Press the cutter head down when the can is in the right position. This will set the opener into motion. It will begin to rotate the can. Hold it as it turns to keep it from tipping.
3. Allow the opener’s magnet to catch hold of the can as it’s cutting through. This will cause the lid to raise up slightly. When the lid is completely cut, lift the top of the cutter head. Carefully disengage the can from the opener.
4. Remove the lid from the opener’s magnet. Grab hold of it between your two fingers versus pressing the cut part against your fingers. Dispose of the lid. Enjoy the contents of the can.