Silicone baking mold use matters needing attention

- Mar 26, 2018-

Some precautions should be taken when using silicone baking membranes for the first time. To be on the safe side, before the first use, we can use clean water to remove the dust that may have been deposited during transportation. 100% silicone material can be disinfected with boiling water.

   Before baking the mold for the first time, you can apply a thin layer of butter to the mold surface to maintain the mold. This step no longer needs to be repeated during the subsequent baking. In the baking process, there are remaining vacant mold positions in the multi-die mold, and cold water is added in the mold. Because empty baking will shorten the life of the silicone mold, adding cold water in the empty mold position can avoid empty baking of the mold.

   Silicone baking mold into the oven should pay attention to what?

  Silicone baking mold into the oven baking, must be placed in the middle of the oven, and the heating tube to maintain a 5-10CM safety distance, avoid direct contact with the oven wall, to prevent damage to the mold heat pipe at high temperatures. In the case of cooking silicone products (such as silicone cooking boxes, cooking bowls, soup boxes, etc.), special attention should be paid to keeping all components and heating pipes at a safe distance when entering the oven.

   Silicone baking mold how to clean?

   Silicone molds, like ordinary kitchen utensils can be cleaned. The product description indicates that it is suitable for dishwashers and can be placed directly into the dishwasher for cleaning. 100% silicone products can be disinfected with boiling water. Add a small amount of detergent to the water during handwashing. Place the mold in water and clean it with a cloth rag. Be careful not to use wire cloth, vegetable cloth or other coarse cloth to clean, so as not to scratch the surface of the mold. After cleaning, put it in a ventilated place to dry it, or store it in a box or drawer. Because silica gel itself has an adsorption function, when it is not used for a long time, it should not be directly exposed to air to avoid adsorbing dust and moisture.