After cooking for a period of time, the kitchen utensils will leave some oil and dirt, and of course the oil treatment method used by everyone is different. Some people use water boiling method, flour decontamination method, rice soup noodle soup decontamination method, etc., then these various oil treatment methods are appropriate? What are the advantages and disadvantages? Now Mirabread kitchenware brand for everyone to share.
1, oil attack method
Use oils that are ready to be discarded and smear the grease that has been on the surfaces of the hood and the tiles around the cooker for a long period of time. After a few minutes, clean them with regular cleaning methods.
Long-term stubborn oil can be “softened” and Changsha kitchen equipment makes it easy to clean.
The scale of the amount is not good enough to grasp, the surface is too smooth or perpendicular to the ground, if the amount is a little more difficult to stay, it is easy to make "the old pollution did not go, add new oil."
2, flour decontamination
Flour is not as bad as soap or detergent in removing grease. The oil in the kitchen or the oil on your hands can be removed with a little flour.
It can not only avoid the spread of oil pollution, but also can clean the used rags very conveniently.
Decontamination with food, which is more important between the two, stainless steel kitchen utensils will we have to get it.
3, rice soup soup decontamination
After the cooking oil or the liquefied gas stove is stained with oil, the thick rice soup can be used to coat the stove. After the rice broth is dried, it can be scraped with wooden chopsticks or plastic sheets, and the oil will be removed together with the rice soup.
This method is simple and convenient, and it is effective for removing obstinate oil on the cooking stove.
The daily rice soup is not easy to keep, so this method is limited in time, and it can be used at any time than other methods.
4, hot alkaline water and washing products
Soak a little soda ash with hot water and add an appropriate amount of washing powder or detergent. Stainless steel kitchen equipment uses such a solution to clean heavy oil-absorbing range hoods or cooktops.
This method is known to most people and has a remarkable effect. It is especially effective when used for cleaning hoods.
If the detergent is used in the solution, because the detergent formula is designed, there are no controls on the harmful substances (such as fluorescent whitening agents) that are harmful to the human body after ingestion. Therefore, they should not be used to clean dishes and the like. Oil on dishware.
Explained the benefits and deficiencies of the four oil treatment methods. I believe that everyone has a certain understanding of the advantages and disadvantages of the oil treatment methods and hope to help you.